---
title: Epson 604XL compatible ink troubleshooting guide
description: Acopia Epson 604XL compatible ink troubleshooting guide
---

[Skip to content](https://contact.acopia.co.uk/epson-604xl-compatible-ink-troubleshooting-guide#main-content)

English

Show submenu for translations

Acopia Group

Open main navigation

Close main navigation

- English
  
  Show submenu for translations
- Contact us

 Contact us

 How can we help you?

- There are no suggestions because the search field is empty.

1. [Acopia Group LTD](https://contact.acopia.co.uk/?hsLang=en)
2. [Troubleshooting](https://contact.acopia.co.uk/troubleshooting?hsLang=en)
3. [Compatible Inks](https://contact.acopia.co.uk/troubleshooting?hsLang=en#compatible-inks)

# Epson 604XL compatible ink troubleshooting guide

## Most problems with compatible cartridges are fixed in under 10 minutes. Work through the steps below in order.

**Check your printer model**  
First, confirm your printer takes 604XL cartridges. The model number is printed on the front or top of the printer.

| Printer range | Compatible models |
| --- | --- |
| Epson Expression Home | XP-2200, XP-2205, XP-3200, XP-3205, XP-4200, XP-4205 |
| Epson WorkForce | WF-2910DWF, WF-2930DWF, WF-2935DWF, WF-2950DWF |

\*Older models such as the XP-2100, XP-3100 and WF-2810 look similar but use 603 cartridges, not 604XL.

**Quick checks before you start**

- All protective tape and the orange or yellow pull tab are fully removed. Do not remove the clear label over the chip.
- Each colour is in the correct slot: black, cyan, magenta, yellow.
- Each cartridge clicks firmly into place when pressed down.
- Cartridges that arrived cold have been at room temperature for at least 1 hour.
- Where possible, you are not mixing cartridges from different suppliers in the same set.

**If the cartridge is not recognised**

Test after each step.

1. Reseat the cartridge. Open the scanner unit, press the tab and lift the cartridge out. Push it back in until it clicks, then close the unit.
2. Clean the chip. Wipe the small gold contacts on the cartridge gently with a dry, lint-free cloth. Do not touch the contacts inside the printer.
3. Power reset. Turn the printer off at the button. Unplug it from the wall for 2 minutes, then plug it back in and turn it on.
4. Install one at a time. Remove all the compatible cartridges. Fit them one by one, closing the unit and letting the printer check each one before fitting the next.
5. Accept the on-screen message. The printer may say a non-genuine cartridge is detected. Press OK, Proceed or Yes to continue. This is normal and does not damage the printer.
6. .Swap a cartridge. If only one colour is rejected, try a second cartridge of that colour. If the second one works, the first is faulty and is covered by our returns policy.

**Printer firmware updates**

A recent printer software (firmware) update is the most common reason compatible cartridges stop working. Some updates change how the printer reads cartridge chips.

- If your printer updated shortly before the problem started, tell us when you contact us. We may be able to send cartridges with an updated chip.
- To avoid this in future, turn off automatic firmware updates in the printer settings or the Epson app.
- Firmware cannot normally be rolled back, so please do not use third-party tools to try.

**If it prints but quality is poor**

Faint, streaky or missing colours usually mean air in the print head after a cartridge change.

1. Run a nozzle check from the printer menu (Maintenance or Setup).
2. If lines are missing, run head cleaning once. Wait 10 minutes and print another nozzle check.
3. Repeat up to 3 times. If there is no improvement, leave the printer for a few hours and try again.
4. Avoid running many cleaning cycles in a row, as this uses a lot of ink.

**Still not working?**

Faulty cartridges are covered by our returns policy. Please contact the Customer Experience team to arrange a return. To help us resolve it quickly, please send:

- Your order number
- Your printer model
- Which colour or colours are not working
- The exact error message on the printer screen (a photo is ideal)
- Whether the printer recently updated its software

Send this information over to our Customer Experience Team who will be able to assist you.

Email: customerexperience@acopia.co.uk | Phone: 033 033 300 21

- [Troubleshooting](https://contact.acopia.co.uk/troubleshooting?hsLang=en#main-content)

    - [Compatible Inks](https://contact.acopia.co.uk/troubleshooting?hsLang=en#compatible-inks)

# Acopia Group

<https://www.facebook.com/> <https://www.twitter.com/> <https://www.instagram.com/> <https://podcasts.apple.com/> [mailto:email@email.com](mailto:email@email.com)

Copyright © 2026, Acopia Group